天利(香港)隔斷實業有限公司
TianLi(Hong Kong)partition Industrial Limited
鋁製路軌安裝方案
ALUMINUM TRACK LNSTALLATION
鋁製路軌安裝方案
ALUMINUM TRACK LNSTALLATION
多向式屏風
OMNI-DIRECTIONAL PANELS
單向式屏風
PAIRED PANELS

萬向式屏風最大程度地體現了空間使用上的靈活性。每片屏風可簡易快速地轉向.以不同角設置在不同的位置或移動到距離較遺的藏板間,因而可創造出多種藏板間佈局設計。

Mni-directional panels provide the utimate flexibility to your operations because each individual panel can easily turn around corners and move to atermnate locations or remote storage. Therefore, many dfferent storage layouts can be created to fit your floor design and layout.

藏板間佈局設計
STORAGE LAYOUT OPTIONS

當無需藏板間時,可選用配置單輸中心懸掛以鉸鏈連接兩片或三片為一組的單向式屏風,相较於多向式屏風而言是一種可快速、簡易設置的理想空間解決方案。選配的鉸鏈可容納邊角線或其他裝飾面。隔音系數與多向式屏風相同。

When remote storage is not required, the center-hung panels hinged in groups of two or three, are the ideal solution for quicker and easier set up, than omni-direction panels. Optional hinging is available to accommodate moldings or other decorations. Acoustical ratings are the same as omni-direction Panels.

產品的特點
FEATURES
  • 鋼結構框架
    Steel Frame

    門框架由2.5mm鍍鋅鋼材機 械焊接而成的,結構堅固耐用。

    The frame is made of 2.5mm welded heavy-duty galvanized steel. It provides the frame with high rigidity & durability.

  • 創新密封膠條
    New Sweep Seals

    屏風頂底及底部配備多達4層的觸碰式密封膠條,與以往產品型號 相比接觸點增加約50%大大提升隔音性能。

    Four-finger sweep seals are installed at panel's top and bottom, which increase the contact point by 50%, when comparing to the past product series. It provides optimum seal contact to keep out sound effectively.

  • 精良收邊系統
    Improved Trim System

    提供加裝保護邊框或無邊框設計的選擇方案,靈活配合固定式及可換式面板,迎合不同設計方案。

    Trimmed and trimless designs provide options for reinforced and replaceable face panels, catering different design proposals.

  • 新研發牛鼻
    Newly Invented Bullnose

    設計劃一的新牛鼻,替代傳統的公母邊牛鼻,並配有垂直壓縮膠條,有效加強嵌合深度,杜絕漏音。

    The single design bullnose replaces the traditional male and female-sided bullnose. Equipped with vertical compressive seals, it improves the depth of interlocking, and prevents sound leaks effectively.

活動隔斷系列產品參數表
MODILE PARTITION SERIES PRODUCT PARAMETERS